Water and Wastewater Treatment

No abstract yet.

• SERKAN BAYAR

Water treatment works using coagulation/flocculation in the process stream will generate a waste sludge. This sludge is termed as ferric, alum, or lime sludge based on which coagulant was primarily used. The works in Adana, Turkey uses ferric chloride. The potential for using this sludge for the treatment of vegetable…

• MESUT BAŞIBÜYÜK

No abstract yet.

• HAMDULLAH SEÇKİN

No abstract yet.

• FATİH ŞEN
• MELİHA KOLDEMİR GÜNDÜZ

This study was conducted to determine the wastewater characteristics as well as the treatment alternatives for the Tafköprü Pulp and Paper Mill in Turkey. The physico-chemical treatability study was conducted by standard Jar-test equipment. The highest COD removal efficiency obtained was 96% for the paper machine, 50%…

• FİLİZ BENGÜ DİLEK

Waste water (COD=1063 mg l−1, BOD5=367 mg l−1) obtained from an integrated textile manufacturing plant was treated in two stages. In the first stage it was coagulated by 1200 mg l−1 alum and 2 mg l−1 polyelectrolyte at pH=8. In the second stage application of photocatalytic advanced oxidation processes to the coagulat…

• İDİL ARSLAN ALATON

No abstract yet.

• AHMET DEMİR

In this study, the photocatalytic degradation of two biologically treated textile finishing wastewater was investigated using powdered TiO2 and ZnO catalysts with UV-A lamp irradiation. Photodegradation and photodecolorization of the samples real textile industrial wastewater is observed directly proportional to pH an…

• DENİZ İZLEN ÇİFÇİ

No abstract yet.

• YILDIZ AYDIN

No abstract yet.

• AHU ALTINKUT UNCUOĞLU

No abstract yet.

• FATİH DOĞAN KOCA

Current design methods for declining rate filtration (DRF) utilize data obtained from pilot or full-scale constant rate filtration (CRF) plants. One of the key questions that must be answered is the following: What is the rise in the water level between backwashes in the operation of a DRF plant? Cleasby and his cowor…

• ÖMER AKGİRAY