Skip to content
akaturk Academic measurement
Sign in Sign up

OpenAlex topic

Electromagnetic Effects on Materials

This page lists works and academicians tagged with an OpenAlex topic. It is not a YÖKSİS primary or secondary field.

OpenAlex 91 works 0 author topics Engineering · Electrical and Electronic Engineering

Works

91 works

  1. Magnetic Instabilities in Fe3C Cementite Particles Observed with Fe K Edge X Ray Circular Dichroism under Pressure 2005
    YÖKSİS SJR Q1 JCR Q1 OpenAlex 87.8%

    The ferromagnetic interstitial iron compound Fe(3)C (cementite) is expected to have Invar properties, whereby a high-moment to low-moment transition should occur when the atomic volume is reduced below a critical value. We, therefore, examine the pressure dependence of the Fe K-edge x-ray magnetic circular dichroism i…

  2. The effect of magnetic field on the wear properties of a ferromagnetic steel 2013
    YÖKSİS SJR Q1 JCR Q1 OpenAlex 75.6%

    No abstract yet.

  3. The effect of magnetic field on the wear properties of a ferromagnetic steel 2013
    YÖKSİS SJR Q1 JCR Q1 OpenAlex 75.6%

    No abstract yet.

  4. The Nature of the Tensile Fracture in Austempered Ductile Iron with Dual Matrix Microstructure 2010
    YÖKSİS SJR Q1 JCR Q3 OpenAlex 86.5%

    No abstract yet.

  5. Effect of magnetic treatment on fatigue life of AISI 4140 steel 2004
    OpenAlex 63.9%

    No abstract yet.

  6. Non-Schmid response of Fe3Al: The twin-antitwin slip asymmetry and non-glide shear stress effects 2017
    YÖKSİS SJR Q1 JCR Q1 OpenAlex 85.7%

    No abstract yet.

  7. The effect of post aging on wear properties of a plasma nitrided ferromagnetic steel under DC magnetic field 2015
    YÖKSİS SJR Q1 JCR Q1 OpenAlex 75.9%

    No abstract yet.

  8. Magnetomechanical damping in FeSiB amorphous wires 1993
    YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 91.1%

    Magnetomechanical damping of amorphous wires has been measured as a function of the surface torsional strain (frequency∼1–4 Hz) at different applied tensile stresses and applied magnetic fields. The wire used in these measurements has a composition of Fe77.5B15Si7.5 with a diameter of 125 μm. The variation of magnetom…

  9. Electrically-Assisted Machining of Titanium Alloy Ti-6Al-4V and Nickel-Based Alloy IN-738: An Investigation 2015
    OpenAlex 76.7%

    Despite their increasing use in leading industries, manufacture of alloys with superior mechanical properties have been a big challenge in the recent years. Researchers have been working on using assisted or augmented processes to overcome this challenge, with methods such as ultrasonically assisted, thermally assiste…

  10. Magnetic Field Effect on Breaking Tuber Dormancy, Early Sprouting, Seedling Growth, and Tuber Formation in Potato(Solanum tuberosum L.) 2020
    YÖKSİS SJR Q3 JCR Q4 OpenAlex 74.7%

    Magnetic field (MF) treatment improves the germination of seeds and enhances the performance of various crops.In this study, the effects of different MF strengths (0-control, 75, 150, and 300 mT) and exposure time periods (0-control, 24, 48, and 72 h) on sprouting of dormant seed potato tubers, vegetative growth (emer…

  11. The effect of furnace annealing and surface crystallization on the anisotropy Delta E and magnetoimpedance effects in Fe71Cr7Si9B13 amorphous wires 2004
    YÖKSİS SJR Q1 JCR Q2 OpenAlex 72.4%

    The dependence of the magnetization loops, coercivity, anisotropy constant, Δ E and magnetoimpedance (MI) effects in positively magnetostrictive Fe 71 Cr 7 Si 9 B 13 amorphous wires on annealing conditions were studied. Samples were annealed at temperatures of 440°C and 460°C for durations between 0.3 and 300 min. The…

  12. The Effect of Magnetic Field Strength on Shoot Regeneration and Agrobacterium tumefaciens-mediated Gene Transferin Flax (Linum usitatissimum L.) 2018
    YÖKSİS SJR Q3 JCR Q4 OpenAlex 63.0%

    This study was conducted to determine the effects of magnetic field (MF) strength on shoot regeneration and Agrobacterium tumefaciens-mediated gene transfer in flax (Linum usitatissimum L.). Seeds of flax cv. Madaras were exposed to different MF strengths (0 - control, 75, 150, and 300 millitesla (mT)) for 24 h by usi…

Academicians

54 academicians