Skip to content
akaturk Academic measurement
Sign in Sign up

OpenAlex topic

Structural Engineering and Materials Analysis

This page lists works and academicians tagged with an OpenAlex topic. It is not a YÖKSİS primary or secondary field.

OpenAlex 166 works 1 author topics

Works

166 works

  1. Predicting the shear strength of reinforced concrete beams using artificial neural networks 2004
    YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 98.3%

    No abstract yet.

  2. Behavior and Design of Link Slabs for Jointless Bridge Decks 1998
    YÖKSİS SJR Q3 JCR Q2 OpenAlex 39.6%

    Maintenance of bridge deck joints is a costly problem. Debris accumulation in the joints can restrain deck expansion, causing undesirable forces in the deck and damage to the structure. Water leaking through the joints is a major cause for the deterioration of bridge girder bearings and supporting structures. Therefor…

  3. An experimental study on channel type shear connectors 2012
    YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 96.5%

    No abstract yet.

  4. Ultimate Shear-Out Capacities of Structural-Steel Bolted Connections 2015
    YÖKSİS SJR Q1 JCR Q2 OpenAlex 87.6%

    Based on the previous research results of the authors, this paper presents an accurate and consistent equation for determining the ultimate shear-out capacity of a structural steel bolted connection. The equation is verified against independent laboratory test results obtained by other researchers around the world. Co…

  5. Ultimate Shear-Out Capacities of Structural-Steel Bolted Connections 2014
    OpenAlex 87.7%

    Based on the previous research results of the authors, this paper presents an accurate and consistent equation for determining the ultimate shear-out capacity of a structural steel bolted connection. The equation is verified against independent laboratory test results obtained by other researchers around the world. Co…

  6. Elevated temperature resistance of welded tubular joints under axial load in the brace member 2014
    YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 96.7%

    No abstract yet.

  7. The Use of Neural Networks in Concrete Compressive Strength Estimation 2010
    YÖKSİS SJR Q2 JCR Q2 OpenAlex top 10% OpenAlex 98.7%

    Testing of ultrasonic pulse velocity (UPV) is one of the most popular and actual non-destructive techniques used in the estimation of the concrete properties in structures. In this paper, artificial neural network (ANN) approach has been proposed for the evaluation of relationship between concrete compressive strength…

  8. Experimental assessment of the semi-rigid connections behavior with angles and stiffeners 2015
    YÖKSİS SJR Q1 JCR Q2 OpenAlex top 10% OpenAlex 96.0%

    No abstract yet.

  9. Effects of Semi Rigid Connection on Structural Responses 2010
    YÖKSİS SJR Q3 JCR Q4 OpenAlex top 10% OpenAlex 96.1%

    There are several idealizations in numerical analysis of structures. In the joints and supports, which is usually assumed to be pinned or rigid, semi-rigid connection should be considered to obtain more realistic, reliable and also economical results. In this study, rotational spring stiffness-connection ratio relatio…

  10. Effects of Semi Rigid Connection on Structural Responses 2010
    YÖKSİS SJR Q3 JCR Q4 OpenAlex top 10% OpenAlex 96.1%

    There are several idealizations in numerical analysis of structures. In the joints and supports, which is usually assumed to be pinned or rigid, semi-rigid connection should be considered to obtain more realistic, reliable and also economical results. In this study, rotational spring stiffness-connection ratio relatio…

  11. Comparison and combination of two NDT methods with implicationsfor compressive strength evaluation of selected masonryand building stones 2018
    YÖKSİS SJR Q1 JCR Q2 OpenAlex 75.9%

    No abstract yet.

  12. Experimental and numerical analysis of a bolted connection in steel transmission towers 2016
    YÖKSİS SJR Q1 JCR Q2 OpenAlex 86.7%

    No abstract yet.

Academicians

1 academicians