Skip to content
akaturk Academic measurement
Sign in Sign up

OpenAlex topic

Metallurgy and Material Forming

This page lists works and academicians tagged with an OpenAlex topic. It is not a YÖKSİS primary or secondary field.

OpenAlex 2,529 works 104 author topics

Works

2,529 works

  1. The influence of feed rate and cutting speed on the cutting forces surface roughness and tool chip contact length during face milling 2007
    YÖKSİS JCR Q2 OpenAlex 88.3%

    No abstract yet.

  2. On localization and void coalescence as a precursor to ductile fracture 2015
    OpenAlex top 1% OpenAlex 99.2%

    Two modes of plastic flow localization commonly occur in the ductile fracture of structural metals undergoing damage and failure by the mechanism involving void nucleation, growth and coalescence. The first mode consists of a macroscopic localization, usually linked to the softening effect of void nucleation and growt…

  3. Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding 2017
    OpenAlex top 1% OpenAlex 99.2%

    No abstract yet.

  4. The growth and coalescence of ellipsoidal voids in plane strain under combined shear and tension 2011
    YÖKSİS SJR Q1 JCR Q1 OpenAlex top 1% OpenAlex 99.3%

    No abstract yet.

  5. Temperature dependent flow softening of titanium alloy Ti6Al4V: An investigation using finite element simulation of machining 2011
    YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 98.7%

    No abstract yet.

  6. Void growth and coalescence in single crystals 2010
    YÖKSİS SJR Q1 JCR Q1 OpenAlex top 1% OpenAlex 99.0%

    No abstract yet.

  7. Vibration analysis of rolling element bearings defects 2014
    YÖKSİS SJR Q2 JCR Q4 OpenAlex top 10% OpenAlex 95.4%

    In this work, vibration analysis of rolling element bearings (REBs) defects is studied. The REBs are the most widelyused mechanical parts in rotating machinery under high load and high rotational speeds. When the defect in arolling element comes into contact with another element surface, an impact force is generated w…

  8. Analysis of forming limits using ductile fracture criteria 2004
    OpenAlex top 10% OpenAlex 97.1%

    No abstract yet.

  9. An experimental study on the comparative assessment of hydraulic bulge test analysis methods 2011
    YÖKSİS JCR Q1 OpenAlex top 10% OpenAlex 98.8%

    No abstract yet.

  10. Void growth and coalescence in ductile solids with stage III and stage IV strain hardening 2011
    YÖKSİS SJR Q1 JCR Q1 OpenAlex top 1% OpenAlex 99.5%

    No abstract yet.

  11. A criterion for the onset of void coalescence under combined tension and shear 2012
    YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 98.9%

    No abstract yet.

  12. A study of spur gear pitting formation and life prediction 2004
    YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 94.7%

    No abstract yet.

Academicians

104 academicians