Electric Motor Design and Analysis

In this paper, extended-Kalman-filter-based estimation algorithms that could be used in combination with the speed-sensorless field-oriented control and direct-torque control of induction motors (IMs) are developed and implemented experimentally. The algorithms are designed aiming minimum estimation error in both tran…

• MURAT BARUT

In this paper, extended-Kalman-filter-based estimation algorithms that could be used in combination with the speed-sensorless field-oriented control and direct-torque control of induction motors (IMs) are developed and implemented experimentally. The algorithms are designed aiming minimum estimation error in both tran…

• OVSANNA SETA ESTRADA

In order to reduce the adverse effect of parameter variation in position sensorless speed control of permanent magnet synchronous motor (PMSM) based on stator feedforward voltage estimation (FFVE), multiparameter estimation using a model reference adaptive system is proposed. Since the FFVE scheme relies on motor para…

• ÖMER CİHAN KIVANÇ
• SALİH BARIŞ ÖZTÜRK

High-performance current control is required to obtain a smooth output torque in permanent-magnet synchronous motor (PMSM) drives. In this manner, a new discrete-time robust predictive current controller is presented for PMSM drives. Controller and current prediction schemes are designed based on the dead-beat structu…

• AHMET FARUK BAKAN

This paper presents an extended review and recent advances in modeling and diagnosis of interturn short circuit (ITSC) faults in permanent magnet synchronous machines, supported with in-depth fault analysis. In the analysis part, the influence of the fault intensity on the machine's parameters and performance is analy…

• TANER GÖKTAŞ

In this paper, the position-sensorless direct torque and indirect flux control of brushless dc (BLDC) motor with nonsinusoidal back electromotive force (EMF) has been extensively investigated. In the literature, several methods have been proposed for BLDC motor drives to obtain optimum current and torque control with…

• SALİH BARIŞ ÖZTÜRK

Temperature- and frequency-dependent variations of the rotor (R'r) and stator (Rs) resistances pose a challenge in the accurate estimation of flux and velocity in the sensorless control of induction motors (IMs) over a wide speed range. Solutions have been sought to the problem by signal injection and/or by the use of…

• OVSANNA SETA ESTRADA

This paper presents a new approach to the sensorless control of the switched-reluctance motor (SRM). The basic premise of the method is that an artificial neural network (ANN) forms a very efficient mapping structure for the nonlinear SRM. Through measurement of the phase flux linkages and phase currents the neural ne…

• ERKAN MEŞE

No abstract yet.

• MÜSLÜM ARKAN

This paper develops analytical principles for torque ripple reduction in interior permanent magnet (IPM) synchronous machines. The significance of slot harmonics and the benefits of stators with odd number of slots per pole pair are highlighted. Based on these valuable analytical insights, this paper proposes coordina…

Permanent-magnet vernier machine (PMVM) is a relatively new type of PM machines. An analytical subdomain model accounting for tooth-tips and flux modulation poles is developed to accurately predict on-load field distributions in PMVMs. Based on two-dimensional (2-D) polar coordinate and magnetic vector potential, this…

• YASEMİN ÖNER

This paper presents the real-time implementation of a bi input-extended Kalman filter (EKF) (BI-EKF)-based estimator in order to overcome the simultaneous estimation problem of the variations in stator resistanceRsand rotor resistanceRr' aside from the load torquetLand all states required for the speed-sensorless cont…

• RIDVAN DEMİR