Academician
RECEP GÜNEŞ
Profesör
Erciyes Üniversitesi Mühendislik Fakültesi Makine Mühendisliği Bölümü
- Mechanical Behavior of Composites20
- Composite Structure Analysis and Optimization11
- High-Velocity Impact and Material Behavior11
- Structural Load-Bearing Analysis10
- Structural Response to Dynamic Loads7
- Numerical methods in engineering5
- Advanced ceramic materials synthesis4
- Cellular and Composite Structures3
- Composite Material Mechanics2
- Mechanical stress and fatigue analysis2
- Electronic Packaging and Soldering Technologies2
- Fire effects on concrete materials2
- Ana Dal Mühendislik Temel Alanı
- Yan Dal Makine Mühendisliği
Citation impact
Citation counts of the articles matched in OpenAlex, citing publications from Crossref and the Stanford/Elsevier list. Sources are shown separately and never added up.
- i10-index
- 28
- Total citations
- 963 Top 5.8% in Türkiye
- Per article
- 26.0
- FWCI
- 1.62 1.00 = world average
- World top 1%
- 0
- World top 10%
- 8
Most cited articles
- Experimental and numerical investigations of low velocity impact on functionally graded circular plates
- The elasto plastic impact analysis of functionally graded circular plates under low velocities
- Elastic flexural behaviour of an adhesively bonded single lap joint with functionally graded adherends
How is this computed?
h-index and citations are computed from the citation counts of this academic’s YÖKSİS articles matched in OpenAlex (not Google Scholar, WoS or Scopus). Unmatched articles are not included. 4 articles (88 citations) tagged with this academic’s YÖK author id in co-authors’ YÖKSİS records count only towards citations, h-index and i10; article counts, percentiles and rankings use their own YÖKSİS list.
Citing publications Crossref 126 publications citing 33 DOI-bearing articles · 15 Türkiye-affiliated
- 2014 1
- 2016 1
- 2018 3
- 2019 22
- 2020 42
- 2021 41
- 2022 11
- 2025 4
- 2026 1
- DOI 10.1016/j.matchemphys.2025.131959 2026
- DOI 10.1007/s11029-025-10319-1 2025
- DOI 10.1007/s00707-025-04605-1 2025
- DOI 10.1002/pc.70473 2025
- DOI 10.1134/s0021894425700178 2025
- DOI 10.2514/1.j061038 2022
- DOI 10.1088/1757-899x/1226/1/012079 2022 · cites 2 articles of this academic
- DOI 10.1177/00219983211061823 2022 · cites 2 articles of this academic
- DOI 10.1016/j.ijimpeng.2021.104065 2022 · cites 2 articles of this academic
- DOI 10.1140/epjp/s13360-021-02296-w 2022
- DOI 10.1080/15376494.2021.2011992 2022
- DOI 10.1016/j.compstruct.2022.115369 2022 · cites 5 articles of this academic
- DOI 10.1016/j.engstruct.2021.113541 2022 · cites 2 articles of this academic
- DOI 10.1016/j.jeurceramsoc.2022.02.055 2022
- DOI 10.1016/j.tws.2021.108724 2022
- DOI 10.1016/j.compositesb.2021.109544 2022
- The effect of carbon nanotubes modified polyurethane adhesive on the impact behavior of sandwich structures TR Mehmet Emin Çetin · Polymer Composites · 2021
- Using finite element analysis to predict the damage in FGM-3D notched plate under tensile load; Different geometric concept TR A. Houari et al. · Engineering Structures · 2021
- Comparison of Static/Dynamic Loading and Tensile Behavior of Interply and Intraply Hybridized Carbon/Basalt Epoxy Composites TR Hafız Muhammad Numan ZAFAR et al. · Applied Composite Materials · 2021
- An Investigation on the Tribological Behaviors of Al 6061–B4C Metal Matrix Composites TR Abdullah Gocer et al. · Protection of Metals and Physical Chemistry of Surfaces · 2021
- DOI 10.1016/j.ijadhadh.2020.102735 2021
- DOI 10.1063/5.0038297 2021
- DOI 10.1016/j.matpr.2021.03.634 2021
- DOI 10.3390/ma14216365 2021
- DOI 10.1515/rams-2021-0033 2021
- DOI 10.1016/j.tws.2020.107188 2021
- DOI 10.1016/j.apm.2020.12.004 2021
- DOI 10.1109/ibcast51254.2021.9393228 2021
- DOI 10.1016/j.compositesb.2021.109216 2021
- DOI 10.1016/j.susmat.2021.e00345 2021
Showing the 30 most recent.
Where does this list come from?
Extracted from the reference lists in Crossref’s public March 2026 data file; 20.3% of the file has been processed, so the list may be incomplete. Crossref citations are never added to or compared with the OpenAlex citation counts; the two sources have different coverage.
Field ranking
Position in the main-field, side-field and keyword cohorts by YÖKSİS article score; each card opens that ranking.
-
Main field Mühendislik Temel AlanıPoints rank #1,909/ 24,860 top 7.7% At university #43/ 295Score 33.55 journal 31.8 · OA add 1.75
- Article rank3,427/24,860
- Scopus rank1,873/24,860
- WoS rank1,789/24,860
- YÖKSİS37
- Scopus34
- WoS34
-
Side field Makine MühendisliğiPoints rank #276/ 3,699 top 7.5% At university #10/ 61Score 33.55 journal 31.8 · OA add 1.75
- Article rank540/3,699
- Scopus rank268/3,699
- WoS rank265/3,699
- YÖKSİS37
- Scopus34
- WoS34
Keyword rankings 3
-
Kw. Katı Cisimler MekaniğiPoints rank #61/ 495 top 12.3% At university #2/ 9Score 33.55 journal 31.8 · OA add 1.75
-
Kw. Kompozit MalzemelerPoints rank #107/ 816 top 13.1% At university #3/ 20Score 33.55 journal 31.8 · OA add 1.75
-
Kw. Sonlu Elemanlar AnaliziPoints rank #20/ 286 top 7.0% At university #1/ 6Score 33.55 journal 31.8 · OA add 1.75
Works 37
YÖKSİS and OpenAlex records: index distribution, journals published in, a filterable article list and the other output types.
Indexes and citation percentiles
?Other counts
Scopus (SJR)
- YÖKSİS rows 34
WoS (JCR)
- YÖKSİS rows 34
Articles
Articles with YÖKSİS and OpenAlex source split; narrow by quartile or TR Index.
Journals with publications
22 journals
- Composite Structures 6
- Ceramics International 2
- International Journal of Adhesion and Adhesives 2
- Journal of Adhesion Science and Technology 2
- Journal of Composite Materials 2
- Journal of Sandwich Structures and Materials 2
- Journal of Thermoplastic Composite Materials 2
- Mechanics of Advanced Materials and Structures 2
- Mechanics of Composite Materials 2
- ISSN 1308-5514 1
- Composites Part A: Applied Science and Manufacturing 1
- Composites Part B: Engineering 1
- Computers and Structures 1
- Defence Science Journal 1
- Finite Elements in Analysis and Design 1
- International Journal of Applied Mechanics 1
- International Journal of Impact Engineering 1
- International Journal of Materials and Product Technology 1
- International Journal of Mechanical Sciences 1
- International Journal of Structural Stability and Dynamics 1
- Journal of Adhesion 1
- Materialpruefung/Materials Testing 1
Narrow down
Article list
- 2024 Comparison of the Ballistic Performance of Kevlar and UHMWPE Helmets Using FEM YÖKSİS SJR Q2 JCR Q3 OpenAlex 61.8%
- 2024 Thermal shock effects on the microstructure and mechanical properties of iron-based composites reinforced by in-situ Fe2B/FeB ceramic phases YÖKSİS SJR Q1 JCR Q1 OpenAlex 77.7%
- 2024 Penetration mechanics of ceramic/metal functionally graded plates under ballistic impact: An experimental perspective YÖKSİS SJR Q1 JCR Q1 OpenAlex 80.5%
- 2024 Damage Behaviors of Thin and Thick Laminated Composites Under Ballistic Effect YÖKSİS SJR Q2 JCR Q3 OpenAlex 62.8%
- 2023 Experimental analysis on deformation and damage behavior of Al6061/SiC functionally graded plates under low-velocity impact YÖKSİS SJR Q1 JCR Q1 OpenAlex 59.1%
- 2023 Normal and oblique ballistic impact damage behaviour of functionally graded plates: Experimental and numerical YÖKSİS SJR Q1 JCR Q1 OpenAlex 73.2%
- 2023 A comparison study on experimental characterization of unidirectional fiber reinforced composites using strain-gauges and virtual extensometers YÖKSİS SJR Q2 JCR Q2 OpenAlex 69.6%
- 2022 Experimental Investigation into the Low-velocity Impact Behavior of Thick and Thin Laminated Composites YÖKSİS SJR Q2 JCR Q3 OpenAlex 51.7%
- 2022 Evaluation of geometrically nonlinear and elastoplastic behavior of functionally graded plates under mechanical loading-unloading YÖKSİS SJR Q2 JCR Q2 OpenAlex 47.9%
- 2021 Numerical investigation on normal and oblique ballistic impact behavior of functionally graded plates YÖKSİS SJR Q2 JCR Q2 OpenAlex 73.3%
- 2020 Experimental investigation of the low-velocity impact response of sandwich plates with functionally graded core YÖKSİS SJR Q2 JCR Q3 OpenAlex 67.9%
- 2019 Low-Velocity Flexural Impact Analyses of Functionally Graded Sandwich Beams Using Finite Element Modeling YÖKSİS SJR Q1 JCR Q2
- 2019 Ballistic performance of honeycomb sandwich structures reinforced by functionally graded face plates YÖKSİS SJR Q1 JCR Q1 OpenAlex 69.2%
- 2018 Experimental damage evaluation of honeycomb sandwich structures with Al/B4C FGM face plates under high velocity impact loads YÖKSİS SJR Q1 JCR Q1 OpenAlex 86.3%
- 2017 Ballistic Limit of Al-Sic Functionally Graded Armor Plates YÖKSİS
- 2017 Experimental tests and numerical modeling of ballistic impact on honeycomb sandwich structures reinforced by functionally graded plates YÖKSİS SJR Q2 JCR Q2 OpenAlex 66.8%
- 2017 Ballistic impact simulation of ceramic/metal armor structures YÖKSİS TR Index OpenAlex 41.2%
- 2016 Development of numerical realistic model for predicting low velocity impact response of aluminium honeycomb sandwich structures YÖKSİS SJR Q1 JCR Q1 OpenAlex 89.5%
- 2014 Experimental and numerical investigations of low velocity impact on functionally graded circular plates YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 91.4%
- 2011 The elasto plastic impact analysis of functionally graded circular plates under low velocities YÖKSİS SJR Q1 JCR Q1
Projects 10 See all (10) →
-
2018 Fonksiyonel Derecelendirilmiş Fe/B4c-B Kompozit Yapıların Üretimi, Metalografik Ve Termo-Mekanik Davranışlarının İncelenmesi
-
2016 Fonksiyonel Kademelendirilmiş Plakaların Farklı Mermi Çarpma Açılarında Balistik Limitlerinin Araştırılması
-
2016 Fonksiyonel Kademelendirilmiş Plakalar ile Desteklenmiş Bal Peteği Sandviç Yapıların Üretim Şartlarının İyileştirilerek Balistik Performanslarının Araştırılması - FBA-2016-6503
-
2015 Katmanlı Kompozit Plakalar ile Desteklenmiş Nomex Bal Peteği Sandviç Yapıların Düşük Hızlı Darbe Davranışının İncelenmesi
-
2013 Fonksiyonel Kademelendirilmiş Plakalar İle Takviyelendirilmiş Bal Peteği Sandviç Yapıların Balistik Performansının İncelenmesi
Proceedings 13 See all (13) →
-
2017 Ballistic Limit of Al-Sic Functionally Graded Armor Plates
-
2017 Demir Matrisli Bor Takviyeli Kompozitlerin (Fe/B) Düşük Hızlı Darbe Davranışlarının İncelenmesi
-
2016 Low Velocity Impact Performance of Honeycomb Sandwich Structures Reinforced by Functionally Graded Face Plates
-
2017 Microstructural Properties and Impact Behaviours of B4C Particle Reinforced Iron Matrix Composites
-
2018 THERMAL SHOCK ANALYSIS OF STEEL PLATE
Collaboration network
From the author lists of YÖKSİS publication records. Duplicate records of a work count once; institutions are co-authors’ current YÖKSİS affiliations.
- Co-authors
- 20
- With an akaturk profile
- 9
- Turkish institutions
- 2
- Co-authored works
- %100
Academic co-authors 9
- MUSTAFA KEMAL APALAK Profesör · Erciyes Üniversitesi same university 24
- KEMAL ARSLAN Doktor Öğretim Üyesi · Erciyes Üniversitesi same university 9
- MURAT AYDIN Doçent · Erciyes Üniversitesi same university 4
- MEVLÜT HAKAN Doktor Öğretim Üyesi · Erciyes Üniversitesi same university 3
- AFŞIN ALPER CERİT Profesör · Erciyes Üniversitesi same university 2
- FEHMİ NAİR Profesör · Erciyes Üniversitesi same university 2
- ZEYNEP GÜL APALAK Profesör · Erciyes Üniversitesi same university 2
- MUHSİN ALÇI Öğretim Görevlisi (ders Vermekle Görevli) · Kayseri Üniversitesi 1
- MUSTAFA HAMAMCI Doktor Öğretim Üyesi · Iğdır Üniversitesi 1
National collaboration 2 institutions
Within own university32 joint works · Erciyes Üniversitesi
- Iğdır Üniversitesi 1 works · 1 academics
- Kayseri Üniversitesi 1 works · 1 academics
Other co-authors (incl. international) 11
JN REDDY 9MUSTAFA YILDIRIM 3İsmail Özkeş 2D.S. Al-BehadiliE Sinan KarakasJaafar Al-HraishawiLEVENT FIDANCISelim ErogluTuraman M ÖnderZ Güi ApalakİSMAİL FURKAN SARUHAN
Authors without an akaturk profile (international researchers, retired or former academics, students, clinicians) are grouped by name spelling; short forms such as “Gulluce M.” join the single full name they match.