Skip to content
akaturk Academic measurement
Sign in Sign up

Academician

YUSUF FURKAN YAPAN

Araştırma Görevlisi

Yıldız Teknik Üniversitesi Makine Fakültesi Makine Mühendisliği Bölümü

Research topics OpenAlex
  1. Ana Dal Mühendislik Temel Alanı
  2. Yan Dal Makine Mühendisliği
Keywords YÖKSİS
Articles 27 YÖKSİS 27 · OpenAlex 0 Total citations 410 h-index 12 · OpenAlex OpenAlex coverage %96 matched 26 / 27 Q1 articles 17 Scopus · WoS Q1 8 Best field rank #3,544 / 24,860 Main field · top 14.3% Co-authors 59 10 Turkish institutions

Citation impact

Citation counts of the articles matched in OpenAlex, citing publications from Crossref and the Stanford/Elsevier list. Sources are shown separately and never added up.

OpenAlex YÖKSİS articles matched in OpenAlex: 26 + YÖKSİS · co-author record: 3
h-index 12 Percentile in Türkiye: 89 #215 of 1,360 at their university by h-index
i10-index
15
Total citations
410
Top 16% in Türkiye
Per article
14.1
FWCI
2.22
1.00 = world average
World top 1%
0
World top 10%
9

Most cited articles

  1. Investigation on the effect of hybrid nanofluid in MQL condition in orthogonal turning and a sustainability assessment 2023 world top 10% 51 citations
  2. Biofuels energy sources and future of biofuels energy in Turkey 2012 49 citations
  3. Orthogonal turning of AISI 310S austenitic stainless steel under hybrid nanofluid-assisted MQL and a sustainability optimization using NSGA-II and TOPSIS 2023 world top 10% 43 citations
How is this computed?

h-index and citations are computed from the citation counts of this academic’s YÖKSİS articles matched in OpenAlex (not Google Scholar, WoS or Scopus). Unmatched articles are not included. 3 articles (56 citations) tagged with this academic’s YÖK author id in co-authors’ YÖKSİS records count only towards citations, h-index and i10; article counts, percentiles and rankings use their own YÖKSİS list. h-index on the OpenAlex author profile: 12.

Citing publications Crossref 16 publications citing 27 DOI-bearing articles · 4 Türkiye-affiliated
  • 2025 15
  • 2026 1
  1. DOI 10.3390/lubricants14030103 2026 · cites 2 articles of this academic
  2. Machining performance analysis and optimization in the milling of mold steel under MQL with nanofluid TR Mevlüt Aydın et al. · Machining Science and Technology · 2025 · cites 7 articles of this academic
  3. Evaluation of nano-MoS2-assisted MQL performances in end milling of AISI 316L austenitic stainless steel and multi-objective optimization via genetic algorithm TR Lot Hadjira et al. · The International Journal of Advanced Manufacturing Technology · 2025
  4. Sustainability and machinability in hard turning under MQL conditions using nanoparticle-enriched vegetable-based fluid: an integrated assessment TR Amine Hamdi et al. · The International Journal of Advanced Manufacturing Technology · 2025 · cites 7 articles of this academic
  5. Life Cycle and Machinability Analysis of Milling Incoloy 286 Using Sustainable Cooling/Lubrication Technologies TR Üsame Ali Usca et al. · Journal of Materials Engineering and Performance · 2025
  6. DOI 10.1063/5.0305708 2025
  7. DOI 10.1007/978-981-95-0063-5_6 2025
  8. DOI 10.1016/j.jclepro.2025.147156 2025 · cites 2 articles of this academic
  9. DOI 10.1007/s00170-025-16563-y 2025
  10. DOI 10.1007/s00170-025-16610-8 2025
  11. DOI 10.1186/s44147-025-00729-2 2025
  12. DOI 10.1007/s12008-025-02449-6 2025
  13. DOI 10.3390/lubricants13110498 2025
  14. DOI 10.1016/j.rineng.2025.108272 2025
  15. DOI 10.1177/09544054251383686 2025
  16. DOI 10.1007/s00170-025-16987-6 2025
Where does this list come from?

Extracted from the reference lists in Crossref’s public March 2026 data file; 20.3% of the file has been processed, so the list may be incomplete. Crossref citations are never added to or compared with the OpenAlex citation counts; the two sources have different coverage.

Field ranking

Position in the main-field, side-field and keyword cohorts by YÖKSİS article score; each card opens that ranking.

YÖKSİS ?
Keyword rankings 1

Works 27

YÖKSİS and OpenAlex records: index distribution, journals published in, a filterable article list and the other output types.

Indexes and citation percentiles

?
TR Index 3 articles
OpenAlex citation percentile
Top 1%0
Top 10%8
Avg · n 26 %70.2
Other counts

Scopus (SJR)

  • YÖKSİS rows 24

WoS (JCR)

  • YÖKSİS rows 21

Articles

Articles with YÖKSİS and OpenAlex source split; narrow by quartile or TR Index.

27articles

Journals with publications

14 journals

Narrow down

Scopus (SJR)
Q117 Q24 Q30 Q43
WoS (JCR)
Q18 Q212 Q31 Q40
TR Index
3articles

Article list

  1. 2025 Machining and Sustainability Performance Comparison for the Milling Process of Al6082 Alloy Under Various Minimum Quantity Lubrication Conditions INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY DOI 10.1007/s40684-024-00655-3 YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 91.5%
  2. 2025 Machinability assessment and optimization of turning AISI H11 steel under various minimum quantity lubrication (MQL) conditions using nanofluids The International Journal of Advanced Manufacturing Technology DOI 10.1007/s00170-025-15418-w YÖKSİS SJR Q1 JCR Q2 OpenAlex top 10% OpenAlex 93.8%
  3. 2025 Evaluation of nano-MoS2-assisted MQL performances in end milling of AISI 316L austenitic stainless steel and multi-objective optimization via genetic algorithm The International Journal of Advanced Manufacturing Technology DOI 10.1007/s00170-025-16763-6 YÖKSİS SJR Q1 JCR Q2 OpenAlex 54.4%
  4. 2025 Enhancing sustainability in CNC turning of POM-C polymer using MQL with vegetable-based lubricant: machine learning and metaheuristic optimization approaches The International Journal of Advanced Manufacturing Technology DOI 10.1007/s00170-025-15962-5 YÖKSİS SJR Q1 JCR Q2 OpenAlex 77.6%
  5. 2025 Synergistic effects of ultrasonic vibration and nanofluid-MQL on surface integrity in sustainable machining of Ti-6Al-7Nb alloy CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY DOI 10.1016/j.cirpj.2025.09.017 YÖKSİS SJR Q1 JCR Q2 OpenAlex 80.0%
  6. 2025 Evaluation of slot milling processes on carbon fiber reinforced polyetheretherketone thermoplastic composite utilizing nanofluid-enhanced minimum quantity lubrication technique JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS DOI 10.1177/08927057251344136 YÖKSİS SJR Q2 JCR Q2 OpenAlex top 10% OpenAlex 95.1%
  7. 2025 Sustainability and machinability in hard turning under MQL conditions using nanoparticle-enriched vegetable-based fluid: an integrated assessment The International Journal of Advanced Manufacturing Technology DOI 10.1007/s00170-025-16780-5 YÖKSİS SJR Q1 JCR Q2 OpenAlex 55.7%
  8. 2025 An innovative hybrid optimization approach for sustainable milling of support structures in additively manufactured Ti-6Al-4V components utilizing NSGA-III and COBRA The International Journal of Advanced Manufacturing Technology DOI 10.1007/s00170-025-16356-3 YÖKSİS SJR Q1 JCR Q2 OpenAlex 51.9%
  9. 2025 The Effects of MQL Pulse Parameters on Cutting Force, Cutting Temperature and Surface Roughness in Turning Process Key Engineering Materials DOI 10.4028/p-UmRTm0 YÖKSİS SJR Q4 OpenAlex 9.1%
  10. 2025 CoCoSo Method-Based Evaluation of Cutting Parameters in Turning of AISI 1040 Steel Under Plain and Nano MoS2 Reinforced Cutting Fluid Assisted MQL Methods Lecture Notes in Mechanical Engineering DOI 10.1007/978-3-031-82746-4_26 YÖKSİS SJR Q4 OpenAlex top 10% OpenAlex 96.4%
  11. 2025 IMPAX ve NIMAX Takım Çeliklerinin Parmak Freze ile İşlenmesinde Yüzey Pürüzlülüğünün Karşılaştırılması Makina Tasarım ve Imalat Dergisi DOI 10.56193/matim.1657815 YÖKSİS TR Index OpenAlex 17.0%
  12. 2024 Investigation of MQL and CNC turning parameters on the machinability of unreinforced polypropylene: study of surface roughness, temperature, and specific cutting energy The International Journal of Advanced Manufacturing Technology DOI 10.1007/s00170-023-12761-8 YÖKSİS SJR Q1 JCR Q2 OpenAlex 82.8%
  13. 2024 Enhancing formability of Ti-6Al-4V cylindrical cups by pulsating hydroforming process: Experimental, numerical and microstructural investigations Engineering Science and Technology-An International Journal-JESTECH DOI 10.1016/j.jestch.2023.101606 YÖKSİS SJR Q1 JCR Q1 OpenAlex 58.5%
  14. 2024 Influence of singular and dual MQL nozzles on sustainable milling of Al6061-T651 in different machining environments Journal of Manufacturing Processes DOI 10.1016/j.jmapro.2023.12.043 YÖKSİS SJR Q1 JCR Q1 OpenAlex 89.5%
  15. 2024 Investigation of ultrasonic vibration assisted orthogonal turning under dry and minimum quantity lubrication conditions and performing sustainability analyses Journal of Cleaner Production DOI 10.1016/j.jclepro.2023.140187 YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 94.4%
  16. 2024 Experimental and numerical investigation of the damage state of Ti-6Al-4V alloy sheet in the tensile test, hydraulic bulging, and hydroforming processes The International Journal of Advanced Manufacturing Technology DOI 10.1007/s00170-024-13633-5 YÖKSİS SJR Q1 JCR Q2 OpenAlex 80.9%
  17. 2024 A novel approach to enhance formability in Ti-6Al-4V alloy: Experimental investigations and microstructural analysis of pulsating tensile test CIRP Journal of Manufacturing Science and Technology DOI 10.1016/j.cirpj.2024.09.008 YÖKSİS SJR Q1 JCR Q1 OpenAlex 53.4%
  18. 2024 The effects of minimum quantity lubrication parameters on the lubrication efficiency in the turning of plastic mold steel The International Journal of Advanced Manufacturing Technology DOI 10.1007/s00170-024-13706-5 YÖKSİS SJR Q1 JCR Q2 OpenAlex 87.0%
  19. 2023 Multi-objective analysis and optimization of energy aspects during dry and MQL turning of unreinforced polypropylene (PP): an approach based on ANOVA, ANN, MOWCA, and MOALO The International Journal of Advanced Manufacturing Technology DOI 10.1007/s00170-023-12205-3 YÖKSİS SJR Q2 JCR Q2 OpenAlex 88.0%
  20. 2023 Orthogonal turning of AISI 310S austenitic stainless steel under hybrid nanofluid-assisted MQL and a sustainability optimization using NSGA-II and TOPSIS Sustainable Materials and Technologies DOI 10.1016/j.susmat.2023.e00628 YÖKSİS SJR Q1 JCR Q1 OpenAlex top 10% OpenAlex 95.5%

Projects 5

  1. 2021 Ti-6Al-4V Alaşımının Hasar Durumunun Deneysel ve Sayısal Olarak İncelenmesi Yükseköğretim Kurumları tarafından destekli bilimsel araştırma projesi · Tamamlandı 2021-06-04 – 2022-08-31
  2. 2023 Biyomedikal Endüstrisinde Kullanılan Ti-6al-7nb Alasımının Ultrasonik Titresim Destekli Nano Grafen Katkılı Nanoakıskan Kullanılan Mmy Yöntemi Ile Sürdürülebilir Talaslı Imalatının Arastırılması, Modellenmesi Ve Optimizasyonu -Tübitak 1001 · Tamamlandı 2023-04-15 – 2025-10-15
  3. 2023 Ti6Al7Nb Alaşımının Ultrasonik Titreşim Destekli MMY Yöntemiyle Tornalama Performansının İncelenmesi Yükseköğretim Kurumları tarafından destekli bilimsel araştırma projesi · Tamamlandı 2023-06-14 – 2024-12-20
  4. 2018 Çift Taraflı Sac Hidroşekillendirmede Yükleme Eğrilerinin Adaptif Kontrolle Optimize Edilerek Şekillendirilebilirliğin Artırılması -Tübitak 1001 · Tamamlandı 2018-05-15 – 2020-05-15
  5. 2020 TÜBİTAK 1001 - Salınımlı Sac Hidroşekillendirme Prosesiyle Ti-6Al-4V Alaşımının Şekillendirilebilirliğinin İyileştirilmesi ve Mikroyapıyla İlişkilendirilmesi TÜBİTAK PROJESİ · Tamamlandı 2020-07-01 – 2023-01-01

Books 1

  1. 2024 Advances in Manufacturing for Aerospace Alloys Springer Cham ISBN 978-3-031-64454-2 Kitap Bölümü · Bilimsel Kitap

Proceedings 8 See all (8) →

  1. 2020 Investigation on Effect of Shrinkage Allowance to the Fatigue Life of Compound Cylinders Operating at High Pressure International Conference on Engineering Technologies (ICENTE'20)
  2. 2025 Comparisons of Experimental and FEA Results in Ultrasonic- and MQL-assisted Machining of Titanium Alloy International Conference on Recent Challenges in Engineering and Technology (ICRCET-25)
  3. 2024 Experimental Investigation of Traditional and Ultrasonic-Assisted Roller Burnishing Under Various Environments 7th INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING
  4. 2022 Determination of appropriate quasi-static constitutive equation for the Ti-6Al-4V alloy 3rd International Conference on Applied Engineering and Natural Sciences ICAENS 2022
  5. 2022 Tüp Hidroşekillendirmede Yükleme Profillerinin Bulanık Mantık Kontrol Algoritması ile Belirlenmesi 19. Uluslararası Makina Tasarım ve İmalat Kongresi

← Back to academicians

Collaboration network

From the author lists of YÖKSİS publication records. Duplicate records of a work count once; institutions are co-authors’ current YÖKSİS affiliations.

Co-authors
59
With an akaturk profile
20
Turkish institutions
10
Co-authored works
%100

Academic co-authors 20

  1. ALPER UYSAL Profesör · Yıldız Teknik Üniversitesi same university 20
  2. MEVLÜT TÜRKÖZ Doçent · Konya Teknik Üniversitesi 5
  3. ERKİN DUMAN Öğretim Görevlisi (ders Vermekle Görevli) · İstanbul Gedik Üniversitesi 3
  4. HABİP GÖKAY KORKMAZ Doktor Öğretim Üyesi · Niğde Ömer Halisdemir Üniversitesi 3
  5. SERKAN TOROS Profesör · Niğde Ömer Halisdemir Üniversitesi 3
  6. UĞUR EMİROĞLU Öğretim Görevlisi (ders Vermekle Görevli) · Kastamonu Üniversitesi 3
  7. HASAN KOTAN Profesör · Bursa Teknik Üniversitesi 2
  8. HAYDAR LİVATYALI Profesör · Yıldız Teknik Üniversitesi same university 2
  9. HÜSEYİN SELÇUK HALKACI Profesör · Konya Teknik Üniversitesi 2
  10. MEHMET ALPER SOFUOĞLU Doçent · Eskişehir Osmangazi Üniversitesi 2
Show all (20)
  1. MEVLÜT AYDIN Araştırma Görevlisi · Konya Teknik Üniversitesi 2
  2. MURAT DİLMEÇ Profesör · Necmettin Erbakan Üniversitesi 2
  3. MİNE USLU UYSAL Doçent · Yıldız Teknik Üniversitesi same university 2
  4. OSMAN ÖZTÜRK Doktor Öğretim Üyesi · Konya Teknik Üniversitesi 2
  5. ERKAN BAHÇE Doçent · İnönü Üniversitesi 1
  6. HARUN MERT İLBEYLİ Araştırma Görevlisi · Balıkesir Üniversitesi 1
  7. MURAT SARIKAYA Profesör · Sinop Üniversitesi 1
  8. MİHRİGÜL EKŞİ ALTAN Profesör · Yıldız Teknik Üniversitesi same university 1
  9. ORHAN ÇAKIR Doçent · Yıldız Teknik Üniversitesi same university 1
  10. ÖMER FARUK GÖKCEPINAR Araştırma Görevlisi · Konya Teknik Üniversitesi 1

National collaboration 10 institutions

Within own university23 joint works · Yıldız Teknik Üniversitesi

  1. Konya Teknik Üniversitesi 5 works · 5 academics
  2. Kastamonu Üniversitesi 3 works · 1 academics
  3. Niğde Ömer Halisdemir Üniversitesi 3 works · 2 academics
  4. İstanbul Gedik Üniversitesi 3 works · 1 academics
  5. Bursa Teknik Üniversitesi 2 works · 1 academics
  6. Eskişehir Osmangazi Üniversitesi 2 works · 1 academics
  7. Necmettin Erbakan Üniversitesi 2 works · 1 academics
  8. Balıkesir Üniversitesi 1 works · 1 academics
  9. Sinop Üniversitesi 1 works · 1 academics
  10. İnönü Üniversitesi 1 works · 1 academics

Other co-authors (incl. international) 39

AMİNE HAMDİ 6SİDİ MOHAMMED MERGHACHE 4HAMMOUDİ ABDERAZEK 3NAVNEET KHANNA 2OUSSAMA BENKHELİFA 2AHMET AKÇADIRCIAHMET HAKAN AKINAHMET ŞİMŞEKALİ OZAN DEMİRAQİB MASHOOD KHANBUSE GÜNEYCherfia AbdelhakimDERVİŞ BERK CÖNGEREGE GÜVENİRELVAN ATEŞEMİRHAN SAATÇİENES USLUERENES ÇİFCİERHAN ALTANEshreb DzhemilovG. KSHİTİJGÖRKEM ÖZTÜRKHADJİRA LOTHARSH SALVİHÜSEYİN EMRE ÇAKIRCAKEMAL VAHAPOĞLUKERİM TÜRKELİMUSA ÖZCANMUSTAPHA TEMMARNESRİNE MELZİNouioua MouradRuslan DzhemalyadinovTALLAL HAKMİUTKU DEMİRVİTALİİ IVANOVYAROSLAV KUSYJYAŞAR EMRE ÜNALYUNUS EMRE YAVUZYUSUF GÜNAY

Authors without an akaturk profile (international researchers, retired or former academics, students, clinicians) are grouped by name spelling; short forms such as “Gulluce M.” join the single full name they match.