Makale detayı · 2019 · article
The Effect of Tool Rotation Speed on Mechanical Properties of Friction Stir Spot Welded (FSSW) AA7075-T6 Aluminium Alloy Sheets
Veri kaynağı ayrımı
- YÖKSİSYÖKSİS makale kaydı
- YÖKSİS dergi adıEuropean Mechanical Science
- OpenAlexOpenAlex zenginleştirmesi (özet, atıf, konular)
- Semantic Scholaratıf sayısı (OpenAlex ile birleştirilmez)
Özet
In this study, the effect of tool rotation speed on the mechanical and metallurgical properties of friction stir spot welded (FSSW) AA 7075-T6 aluminum alloy plates was investigated. Aluminum alloy plates were joined by FSSW using welding parameters consisting of three different rotation speeds of 1040, 1320 and 1500 rpm and a constant insertion depth of 3.2 mm. In spot welded specimens, the highest tensile strength value (6200 N) was obtained in plates welded at a tool rotation speed of 1500 rpm. The data obtained from the metallographic analysis are compatible with the tensile test results. Metallographic investigations demonstrated that there was a small amount of porosity in the welding zone of the specimens jointed at 1500 rpm.
Konular
Atıflar
OpenAlex cited_by_count. WoS veya Scopus atıf sayısı değildir; o kaynaklar için ayrı kolon yoktur.
8atıfOpenAlex · cited_by_count (önbellek / veritabanı)
Yerel katalogda bu makaleye atıf yapan 4 yayın (OpenAlex referans eşleşmesi; tam dünya listesi değildir).
- 2023 Friction Stir-Spot Welding of AA5052-H32 Alloy Sheets: Effects of Dwell Time on Mechanical Properties and Microstructural EvolutionAtıf 15 · OpenAlex
- 2022 Evaluation of fracture toughness and Charpy V-notch test correlations for selected Al alloysAtıf 8 · OpenAlex
- 2022 Investigation of weld defects and mechanical properties of dissimilar friction stir spot welded dual phase (DP600) steel and aluminum alloy (AA 7075-T6) platesAtıf 2 · OpenAlex
- 2022 Investigation of weld defects and mechanical properties of dissimilar friction stir spot welded dual phase (DP600) steel and aluminum alloy (AA 7075-T6) platesAtıf 2 · OpenAlex